speak to one of our team

0800 121 4809

speak to one of our team

0800 121 4809

To complement our doors and roofs, Express offer fantastic-looking roof lanterns designed to project light down into an enclosed space, making them ideal for new extensions, orangeries, or to transform an area of the house which has a flat roof.
Each bespoke roof lantern is manufactured in-house in our purpose-built facilities in Leeds, and is available on a trade supply-only basis. Alternatively, we will liaise with the on-site building team to advise how to prepare for the roof lantern’s installation, attend site, measure the opening and install the bespoke roof lantern when manufacture is complete.

All Express roof lanterns are designed and structurally guaranteed by our experienced, technical team.
The Eos roof lantern is a more cost effective solution than our sky-line roof lantern but is a viable alternative because as well as value for money it boasts comparable design features. The roof itself has designed around maximum uninterrupted sight lines – bar numbers are reduced (or can be added if you prefer) and the ridge board and hub ends are as unobtrusive as possible. The sky-line roof lantern is a slimmer system but our Eos range can allow for larger areas of glass, meaning less aluminium within the roof itself.

Our recommendation? Both are great products, there is additional information on the EOS roof lantern in the tabs above, but to gain a real insight into our product offerings we strongly recommend visiting a showroom or contacting our sales team to decide which system is the most ideally suited for your home and your project.

Rectangular double ended roof lights up to 4m long by 2m wide, available at the sizes below:

  • Width from 1000-2000*mm
  • Length from 1500-4000*mm. 

Maximum Light Transmition 

  • 2 bars at each end (compared to five in alternative systems)
  • Minimal framework for optimum aesthetics.
  • Low profile spars / not deep internals that cast shadows

Superb Thermal Performance

The thermal performance has been optimised to make it suitable for extensions in domestic properties. Typical U value with 1.1 glass for a 1000mm wide x 2000mm long rooflight is 1.4 W/m2K. The larger the roof lantern, but the more thermally efficient the overall product becomes.

The roof is made up of with fewer spars, meaning less leakage points.

Our Eos range is a complete aluminium roof system boasting a thermally broken aluminium ridge body. Sleeved low profile eaves rider rail and aluminium glazing bar and top caps.

25 degree pitch all round.

Low profile eaves beam (no gutter) designed to be fitted with oversailing 24mm double glazed units (high performance low e, self cleaning and solar control in blue or neutral/clear offered as standard.

Full colour range in any RAL colour.

*Width and length are defined as to the external face of the timber kerb (not supplied, recommended to be 150mm high x minimum of 70mm wide).

Industry Leading Strength

IXX VALUE MM4:

RIDGE 4,512k

TRANSOM 385K

HIP 579K

 

Firs House

Firs House

This traditional property in Harrogate was built in 1912 but today it is almost unrecognisable, packed full of Express Bi Folding Doors products as well as a kitchen, bathrooms, bedrooms & a BBQ area from our sister Co Express in the Home.

Read more...

XP Glide, East London

XP Glide, East London

This ten metre run of sliding doors are the feature product within this home which also boasts our aluminium windows and a roof lantern.

Read more...

A Grand Garden House

A Grand Garden House

Something special in the garden - An immaculate garden house containing our XP View bi folding doors with electric Uniblinds, shaped cheese wedge frames, and a roof lantern.

Read more...

what you are saying

view more

Full range of RAL colours available.

Full range of glazing options.

Available in set sizes below.

Designed with minimal spars as displayed below.

Aditional spart can be added into the roof if required:

Full colour range in any RAL colour.

*Width and length are defined as to the external face of the timber kerb (not supplied, recommended to be 150mm high x minimum of 70mm wide).